Product code E113 Light Up E113: Recessed floor luminaire Earth D=144 mm - Warm White - Flood optic Technical description: Recessed luminaire applicable to the floor or ground, designed for fitting monochrome white LED sources, for illumination, fixed optic, with incorporated electronic control gear. The round frame has a diameter D=144 mm; the body and frame are made of AISI 304 stainless steel with sodium-calcium extra clear glass, thickness 12mm. Stainless steel body coated with black paint. The luminaire is fixed to the outer casing by means of two TORX-type screws and appropriate retention seals that ensure proper anchoring. Inclusive of LED circuit, OPTI BEAM aluminium reflector and black plastic cover. The product is wired using an A2 stainless steel cable gland, with type-H07RNF 2x1 mm² outgoing power cable (L=1200 mm). The cable is equipped with an anti-transpiration device (IP68) consisting of a silicone seal placed on the power cable and housed inside the product. The outer casing for installation can be ordered separately from the plastic optical assembly. The assembly made up of the frame, optical assembly and outer casing guarantees 5000 kg resistance to static loads. Maximum glass surface temperature is lower than 40°C. Installation: The product is secured to the outer casing by means of two TORX-type screws. The luminaire can be installed recessed, floor-standing, using an outer casing or on the ground. Colour: Steel (13) Weight (Kg): 1.63 Mounting: Floor recessed|ground recessed Wiring: Product inclusive of 220-240 VAC electronic control gear Notes: IP68 protection rating for both the product and the power cable using IP68 connectors * The product is not deemed suitable for installation in pools and fountains. Overvoltage protection: 2KV Common mode, 1KV differenzial mode Product configuration: E113+X197.04 E113: Recessed floor luminaire Earth D=144 mm - Warm White - Flood optic X197.04: Plastic casing for installation on floors + end cap - Black Product characteristics: Total lighting output [Lm]: 1369 Total luminous flux at or above an angle of 90° [Lm]: 1369 Total power [W]: 11.7 Emergency luminous flux [Lm]: / Luminous efficacy [Lm/W]: 117 Voltage [V]: - Life Time: 100,000h - L90 - B10 (Ta 25°C) Life Time: 100,000h - L90 - B10 (Ta 40°C) Intervallo temperatura ambiente: from -30°C to 50°C. Number of optical assemblies: 1 Optical assembly Characteristics Type 1: Light Output Ratio (L.O.R.) [%]: 84 Number of lamps for optical assembly: 1 Lamp code: LED Socket: / ZVEI Code: LED Ballast losses [W]: 1.9 Nominal power [W]: 9.8 Colour temperature [K]: 3000 Nominal luminous [Lm]: 1630 CRI: 80 Lamp maximum intensity [cd]: / Wavelength [Nm]: / Beam angle [°]: 32° MacAdam Step: 2