Accessory code
PB10
EN54 passive speaker for recessed installation in an Ø170 mm Blade R body. - 12W 8 ohm /  12W 100V / 6W 70V
PB10: EN54 passive speaker for recessed installation in an Ø170 mm Blade R body. - 12W 8 ohm /  12W 100V / 6W 70V
Technical description:
Passive speaker for recessed installation in an Ø170 mm Blade R body.
The Speaker can operate with traditional amplifiers with a constant impedance of 8 ohm or with 100/70 V line amplifiers for music and announcements (PA-public address system).
Extruded aluminium and steel body with a painted mesh on the front.
The speaker is CPR / EN54-24 certified which means it can be used on "Voice Alarm" evacuation systems outlined in the standard.
3" loudspeaker with a neodymium magnet for increased performance and lightness.
Rated power: 12 W @ 8 ohm  or 12 W @ 100 V (PA)
frequency response: 115 Hz - 20,000 Hz, sensitivity: 82 dB SPL 1W @ 1 m. 
Dispersion angle 160° conical (1 kHz).
Complete with ceramic terminal block and thermal fuse inside the body.
Installation:
Secured using 3 screws at the back of the Blade R device.
Colour:
White (01) | Black (04)
Weight (Kg):
1.2
Mounting:
ceiling surface
Wiring:
Complete with cable clamp and 90 cm long anti-flame cable and terminal block PH120 for connection.  Red/black for 8 ohm connection, black/blue/brown for 100 V / 70 V line connections.  2 power selection (12W / 6W@100V or 6W / 3W@70V).
Notes:
In systems with traditional constant impedance amplifiers the low frequencies must be limited to less than 115 Hz by adjusting the source’s equalization controls (e.g. the amplifier bass knob).
IP22
EN54