Product code
BX03
iPro
BX03: Spotlight with bracket - Warmk White COB LED - electronic ballast 220÷240V ac - medium optic
Attention! Code no longer in production
Technical description:
Floodlight designed to use Warm White COB LED lamps with a medium optic. Can be installed at ground level, on walls (using screw anchors) and on pole mounting systems. The luminaire consists of an optical assembly/component-holding box and hidden fixing bracket. The optical assembly and front frame are made of die-cast aluminium alloy painted with a smooth finish (grey RAL 9007) or a textured finish (white RAL 9016). The painting process includes a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The next painting stage consists of a primer and a liquid acrylic paint, cured at 150°, with a high level of weather and UV ray resistance. The tempered sodium-calcium glass cover has customised serigraphy, is 4mm thick, and joined to the frame with silicone. The frame is fastened to the optical assembly by two M5 AISI 304 stainless steel captive screws and a galvanised steel safety cable. The product comes complete with a warm white colour, monochrome COB LED circuit, an optic with a 99.93% super-pure aluminium reflector with a polished, anodized surface and built-in electronic ballast. The component-holding box, in the rear of the luminaire, is set up to hold the control gear, which is fixed with captive screws on a galvanised steel pull-out plate. The control gear can be accessed through the rear door made of painted aluminium alloy, fixed to the product body with four M5 AISI 304 stainless steel captive screws and a safety cable. iPro can be adjusted +95°/ -5° relative to the horizontal line using a bracket made of extruded aluminium, on which a graduated scale (with 15° steps) is marked using serigraphy. The internal silicone seals guarantee watertightness IP66h Set up for pass-through wiring using a double M24x1.5 nickel-plated brass cable gland (suitable for cables with 7÷16mm diameter). All external screws used are made of A2 stainless steel. The luminaire technical characteristics conform to EN60598-1 standards and particular requirements.
Installation:
Ground, wall or ceiling installation using special bracket. Secure using screw anchors for concrete, cement and solid brick.
Colour:
White (01) | Grey (15)
Weight (Kg):
2.8
Mounting:
wall arm|ground surface|wall surface|ground anchored|ground spike|ceiling surface|u-bracket
Wiring:
Luminaire with electronic control gear 220 ÷ 240V ac, 50/60 Hz.
Notes:
IK09 with protective grille accessory.
Class II;960°C;IK07;IP66
CE;ENEC-03;BIS;EAC;NOM
Product configuration: BX03
BX03: Spotlight with bracket - Warmk White COB LED - electronic ballast 220÷240V ac - medium optic
Product characteristics:
Total lighting output [Lm]: 1184
Total luminous flux at or above an angle of 90° [Lm]: 0
Total power [W]: 13.6
Emergency luminous flux [Lm]: /
Luminous efficacy [Lm/W]: 87.1
Voltage [V]: -
Life Time: 100,000h - L80 - B10 (Ta 25°C)
Life Time: 100,000h - L80 - B10 (Ta 40°C)
Intervallo temperatura ambiente: from -20°C to +35°C.
Number of optical assemblies: 1
Optical assembly Characteristics Type 1:
Light Output Ratio (L.O.R.) [%]: 64
Number of lamps for optical assembly: 1
Lamp code: LED
Socket: /
ZVEI Code: LED
Ballast losses [W]: 1.6
Nominal power [W]: 12
Colour temperature [K]: 3000
Nominal luminous [Lm]: 1850
CRI: 80
Lamp maximum intensity [cd]: /
Wavelength [Nm]: /
Beam angle [°]: 20°
MacAdam Step: 2