Product code
AKU1
Lander
AKU1: Bollard H=950 mm, Longitudinal Asymmetric Optic, Warm LED, 220-240V ac
Attention! Code no longer in production
Technical description:
Direct light luminaire, designed to use monochrome LED lamps. It consists of a body, an optical assembly and a fixing base. Optical assembly and die-cast aluminium glass-holder frame. 5mm thick tempered sodium-calcium closing glass with black serigraphy. Body and optical assembly subjected to a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The following painting stage consists of a primer and a liquid acrylic paint, cured at 150°C, with a high level of weather and UV ray resistance. The body encapsulates two stainless steel rods fixed to the base that make the device highly knock and vandal-resistant. Longitudinal Asymmetric Optic (AL) with high performance Opti-smart reflectors in superpure aluminium coated with silver deposits offering uniform light distribution. Both the LED unit and the ballast may be substituted. Optical assembly complete with electronic control gear and output power cable. Includes a gel-based IP68 connection box for pass-through wiring. High level visual comfort for pavements and walkways. All the screws used are made of A2 stainless steel.
Installation:
Can be ground/floor installed using screw anchors (on pavements) or via a fixing base and plate with Dakromet coated anchors for added protection against corrosion (to be ordered separately).
Colour:
Grey (15)
Weight (Kg):
8
Mounting:
ground surface|ground anchored
Wiring:
Product complete with 220÷240V ac electronic control gear.
Notes:
Overvoltage protection: 4kV in
Common Mode (CM), 2kV in
Differential Mode (DM).
• The SPD accessory (JAL6)
increases overvoltage protection to
6kV/10kV (CM/DM).
Class II;IK09;IP66
CE;UKCA;ENEC-03;CCC S&E;BIS;EAC;Retilap
Product configuration: AKU1
AKU1: Bollard H=950 mm, Longitudinal Asymmetric Optic, Warm LED, 220-240V ac
Product characteristics:
Total lighting output [Lm]: 1280
Total luminous flux at or above an angle of 90° [Lm]: 0
Total power [W]: 11.9
Emergency luminous flux [Lm]: /
Luminous efficacy [Lm/W]: 107.6
Voltage [V]: 230
Life Time: 100,000h - L90 - B10 (Ta 25°C)
Life Time: 100,000h - L90 - B10 (Ta 40°C)
Intervallo temperatura ambiente: from -30°C to 50°C.
Number of optical assemblies: 1
Optical assembly Characteristics Type 1:
Light Output Ratio (L.O.R.) [%]: 80
Number of lamps for optical assembly: 1
Lamp code: LED
Socket: /
ZVEI Code: LED
Ballast losses [W]: 2.1
Nominal power [W]: 9.8
Colour temperature [K]: 3000
Nominal luminous [Lm]: 1600
CRI: 80
Lamp maximum intensity [cd]: /
Wavelength [Nm]: /
Beam angle [°]: /
MacAdam Step: 3