Product code
BV69
Woody
BV69: Floodlight with base LED - Electronic 48-52Vdc - DMX512-RDM - Flood optic
Attention! Code no longer in production
Technical description:
Direct light luminaire, designed to use single chip RGB LED lamps (Red, Green, Blue), a Flood optic and DMX512-RDM control with searching and addressing function. Installtion in floors, walls and ceilings (with screw anchors). Consists of an optical assembly and a component holder base. Optical asssembly, arm, base and frame are constructed in EN1706AC 46100LF aluminium alloy and painted. The painting process includes a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The painting stage consists of a primer and a liquid acrylic paint, cured at 150 °C, with a high level of weather and UV ray resistance. The 4 mm thick, tempered, sodium-calcium, closing glass is colourless, transparent and with custom grey silk-screen. It is secured with captive screws. The silicone gasket unergoes a post-cooling treatment, in an oven at 200°. The optical assembly allows vertical and horizontal adjustments, with the possibility of locking the adjustment for aiming, and it has slots in the frame for rainwater drainage. Optics with plastic lenses Flood version. Circuit complete with12 single chip RGB LEDs (n. 4 Red, Green and Blue LEDs) and 48÷52Vdc DMX512-RDM electronic control driver (control gear ordered separetely). The luminaire is complete with two black polyamide PG11 cable clamps, suitable for cables with a diamter between 6.5 and 11mm and it is supplied with two sections of cable 5x L=1100mm for through wiring (to be used for the DMX signal and for the 48Vdc control gear). All external screws used are made of A2 stainless steel. Complete with lamp.
Installation:
The luminaire can be installed in floors, walls and in the ground with screw anchors, in the ground with an accessory peg and on branches with as special accessory.
Colour:
Black (04) | Grey (15)
Weight (Kg):
1.5
Mounting:
external wall corner|internal wall corner|wall arm|ground surface|wall surface|ground spike|ceiling surface|free standing|pole-top
Wiring:
48-52Vdc DMX512-RDM electronic driver. For the electrical connection there are 5-pole IP68 linear connectors (BZS6), a cap for the IP68 (BZQ7) connectors+120 ohm resistance, a 5-pole Y connector for the connection between the DMX signal cable and the power supply cable (BZN7) and DIN 48V dc bar electronic ballasts to be ordered separately: 120W (BZ14), 240W (BZ15) and 480W (BZ16).
Notes:
Complete with lamp. DMX specifications require the insertion of a 120 Ohm terminating resistor to be placed between the DATA+ and DATA- terminals of the last product in the line (BZQ7). If there is no DMX signal the product runs the dynamic colour sequence by default. Versions with DALI driver available on request.
Class III;960°C;IK07;IP66
ENEC-03;BIS;EAC;NOM
Product configuration: BV69
BV69: Floodlight with base LED - Electronic 48-52Vdc - DMX512-RDM - Flood optic
Product characteristics:
Total lighting output [Lm]: 473
Total luminous flux at or above an angle of 90° [Lm]: 0
Total power [W]: 19
Emergency luminous flux [Lm]: /
Luminous efficacy [Lm/W]: 24.9
Voltage [V]: -
Life Time: 50,000h - L80 - B10 (Ta 25°C)
Intervallo temperatura ambiente: from -20°C to +35°C.
Number of optical assemblies: 1
Optical assembly Characteristics Type 1:
Light Output Ratio (L.O.R.) [%]: 75
Number of lamps for optical assembly: 1
Lamp code: LED
Socket: /
ZVEI Code: LED
Ballast losses [W]: 8
Nominal power [W]: 11
Colour temperature [K]: RGB
Nominal luminous [Lm]: 630
CRI: /
Lamp maximum intensity [cd]: /
Wavelength [Nm]: /
Beam angle [°]: 32°
MacAdam Step: /